T7520597 Auto Parts Solenoid Valve

   The function of Flameout Solenoid Valve: the use of flameout Solenoid valve can ensure that the engine is forced to flameout when the engine is running without oil or when the oil pressure is low, so as to protect the engine from damage. Note: If the engine is stopped, there must be no oil pressure. At this time, the flameout Solenoid Valve will not work even if it is energized. The work delay of the flameout solenoid valve is about 30 seconds.

   Precautions for flameout solenoid valve:
1. Before installing the flameout solenoid valve, check the mains power supply circuit carefully to make sure the fuse, the mains switch is connected normally, and whether the voltage output of the mains switch is above 24V; if there is any abnormality, be sure to check it!
2. Check the wiring of the flameout solenoid valve. Generally, there are three lines of black, white and red. The black line is the common terminal. Before wiring, re-check whether the wire voltage is above 24V;
3. Correctly connect the inlet end of the flameout solenoid valve, test first, turn on the car, power on the whole vehicle, close the flameout solenoid valve, and make sure that the solenoid valve has been completely sucked in place. If it is not in place, it is easy to break. , for three or five minutes, to see if there is any hot phenomenon, if not, the installation is normal.