1G772-60012 Fuel Shutoff Solenoid Valve

  The oil shut-off Solenoid valve is to prevent the oil supply from being cut off after the machine is shut down. There is no air storage capacity in the main engine of the screw machine, the intake/exhaust air can be assumed to be at both ends of the rotor, and the intake/exhaust valves are all main engine peripherals. The intake valve can only be adjusted, the exhaust valve is just a check valve, if the function cannot be carried out must be replaced.

  Solenoid valves are industrial equipment controlled by solenoids to adjust the direction, flow, speed and other parameters of the medium in the industrial control system. The Solenoid Valve is controlled by the effect of solenoid, and the main control method is controlled by the relay. In this way, the solenoid valve can be combined with different circuits to achieve the expected control, and the accuracy and flexibility of the control can be guaranteed. There are many kinds of solenoid valves, different solenoid valves play a role in different positions of the control system, the most commonly used are check valves, safety valves, directional control valves, speed regulating valves, etc.!

  As the name suggests, the oil-cutting solenoid valve is a valve controlled by the circuit. There are two kinds of power on, power on, power off, and off. Its interior is operated by an electromagnet and a return spring pulling a valve. There is no air tank inside. Its oil inlet and oil outlet are actually inseparable and can be installed interchangeably. If it breaks, the repair is of little value, it is better to buy a new one!

  The oil shut-off solenoid valve is to prevent the oil supply from being cut off after the machine is shut down. There is no air storage capacity in the main engine of the screw machine, the intake / exhaust can be assumed to be at both ends of the rotor, and the intake / exhaust valves are all main engine peripherals.