3357411 Fuel Shut Off Solenoid

  There are two types of diesel engine flameout: one by pulling the wire, and the other by de-energizing through the Solenoid valve.

  Cable stalling is caused by pulling the wire to pull the oil cut-off switch of the high-pressure oil pump. Solenoid Valve flameout is an oil-cut solenoid valve that can cut off the high-pressure oil pump through the circuit switch to achieve flameout. Solenoid valves are not available in every high-pressure oil pump. This depends on the manufacturer's setup requirements.

  The diesel engine is the piston movement in the cylinder block, and the mixture of compressed air and diesel makes it reach the ignition point, causing the engine piston crank to work, and does not require a circuit, so the diesel engine works less than the gasoline engine by one circuit; Whether the cable is extinguished is to block the oil circuit or put the air pressure in the cylinder is not very clear!