13034654 Auto Parts Solenoid Valve

    What do the five wires of the Flameout Solenoid Valve represent?
Green, yellow, and blue are signal wires for measuring motor rotation speed, white and black are connected to the startup capacitor, and red wire is used as COM. There should be CW and CWW on the connection diagram measured by the speed controller. These two The rotation direction of the motor can be changed by changing the terminal wiring.
   How the flameout Solenoid valve works
There is a coil in the flameout Solenoid Valve that is the same as that of the generator. When the power is turned on, a magnetic force is generated to pull the flameout switch back to the oil. When the power is off, there is no magnetic force.
   After the flameout solenoid valve is used for a long time, the piston is easily blocked by dust and dirt and cannot move, and then there is a phenomenon that it cannot be started or flameout. It needs to be removed and cleaned, and no lubricating oil can be applied inside, because the solenoid valve is close to the engine, and the lubricating oil is easily mixed with dust and evaporated into mud by the high temperature of the engine.
   When such a problem occurs, it can be manually pulled, fixed, or removed and changed into a wire pull, of course, it can also be cleaned or replaced.