3932530 fuel stop solenoid

  First, how to wire the flame-out Solenoid valve.

  It has 3 wires, black, white, red, black line for the negative electrode, white and red for the positive pole of 24V electricity, if the point is not connected wrong, the resistance between black and white measured with a multimeter is about 115 kiloohms, the resistance between black and red is about 50 ohms, if it is not near these values but very large, megaohm-level, it means that the flame-out Solenoid Valve is broken.

  Second, how to wire the AX diesel engine electric flameout controller.

  AX type diesel engine electric flameout controller wiring method:

1. The red wire is connected to the positive pole of the battery (normal power supply);

2. ON gear of the "green line" contact ignition lock switch;

3. The "black wire" is connected to the negative pole of the battery (iron);

4. START gear or Y gear (warm-up gear) of the "yellow line" contact ignition switch.