 HomeProductsSolenoid ValveTransmission solenoid valve271526710122 4/2 Pneumatic Valve

Contact Supplier

Ms. Li

Leave a message

Contact Now

271526710122 4/2 Pneumatic Valve

$8

≥100
Box

100 /Box (Min. Order)

Payment Type:

T/T,Paypal

Incoterm:

FOB

Min. Order:

100 Box

Transportation:

Ocean,Air,Express

Port:

NINGBO,SHANGHAI

Contact Now

Product Description

Product Attributes
Supply Ability & Additional Information
Packaging & Delivery

< >

Overview

Product Attributes

Model No.: 271526710122

Brand: MEIRUIER

Place Of Origin: China

Warranty: One Year

Processing Custom: No

Encapsulation: 1

Product Status: Brand new

Voltage: 24V

Applicable Car Models: Tata

Part No/OE: 271526710122

Cross-border Export Supply: Yes

Supply Ability & Additional Information

Packaging: NORMAL

Productivity: A THOUSAND A DAY

Transportation: Ocean,Air,Express

Place of Origin: WENZHOU

Supply Ability: PRODUCT HAVE MORE STOCK,CAN SHIP IN THE FIRST TIME

Certificate: IATF16949

HS Code: 8708309500

Port: NINGBO,SHANGHAI

Payment Type: T/T,Paypal

Incoterm: FOB

Packaging & Delivery

Selling Units:: Box

Package Type:: NORMAL

Picture Example:

Share several common fault cases and solutions. Fault one: Solenoid valve coil short circuit or open circuit detection method: first use a multimeter to measure its on-off, the resistance value is close to zero or infinity, that indicates that the coil short circuit or open circuit. If the measurement of its resistance is normal (probably tens of ohms), it does not mean that the coil must be good (I once measured a Solenoid Valve coil resistance of about 50 ohms, but the solenoid valve can not operate, everything is normal after replacing the coil), please carry out the following final test: find a small screwdriver and place it near the metal rod worn in the solenoid valve coil, and then energize the solenoid valve, if it feels magnetic, then the solenoid valve coil is good, otherwise it is bad. Fault solution: replace the solenoid valve coil. Fault two: There is a problem with the solenoid valve plug/socket If the solenoid valve is the kind with a plug/socket, there may be a problem with the metal reed of the socket, a problem with the wiring on the plug (such as connecting the power cord to the grounding wire) and other reasons that cannot send the power to the coil. It is best to make a habit of screwing the fixing screw after inserting the plug into the socket, and screwing on the fixing nut on the coil after the spool stem. If the plug of the solenoid coil is equipped with a light-emitting diode power indicator, then the DC power supply must be connected when the solenoid valve is driven, otherwise the indicator will not light up. In addition, do not swap power plugs with light-emitting diode power indications of different voltage levels, as this will cause the LEDs to be burned out/the power supply (replace with a plug with a lower voltage level) to be short-circuited or the LEDs emit very weakly.

Product Categories : Solenoid Valve > Transmission solenoid valve

Hot Products

Email to this supplier

*Subject:
*To:

Ms. Li
*Email:
*Message:

Your message must be between 20-8000 characters