1503ES-12S5SUC12S Fuel Shutdown Solenoid

  When the diesel engine is turned off, there is a coil like the generator in the Solenoid valve, that is, when the power is on, the magnetic force is generated to pull the flameout switch back to the oil, and there is no magnetic force when the power is off, and the spring pushes the flameout to the flameout position, and there is no oil supply. After long-term use, the piston is easily blocked by dust and dirt and cannot be moved, and then there is a phenomenon that cannot be started or cannot be extinguished.

  Solenoid Valve installation precautions:

  1. When installing, it should be noted that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in places where there is direct dripping or splashing. The solenoid valve should be installed vertically;

  2. The solenoid valve should ensure normal operation within the fluctuation range of 15%-10% of the rated voltage of the power supply;    3. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. And it needs to be powered on several times to make it suitable for temperature before it can be officially put into use;

  4. The pipeline should be thoroughly cleaned before the installation of the solenoid valve. The medium passed in should be free of impurities. Valve front loading filter;

  5. When the solenoid valve fails or is cleaned, in order to ensure that the system continues to operate, a bypass device should be installed.