1503ES-12S5SUC5S Fuel Shutoff Solenoid

  Precautions for Flameout Solenoid Valve:

  First, before installing the flame-out Solenoid valve, carefully check the total electric input circuit to determine the fuse, the total switch connection is normal, and whether the total switch voltage output is above 24V; If there is any abnormality, be sure to check well!

  Second, the flame-out Solenoid Valve wiring inspection is generally black, white, red three lines, black line for the common end, white line is to maintain weak current input, red line is to start and close strong current input; The three wires must be connected correctly, and before wiring, re-check whether the wire voltage is above 24V;

  Third, correctly connect the flame-out solenoid valve inlet end, first test, open the car, the whole vehicle is powered on, the flame-out solenoid valve is closed, determine that the solenoid valve has been completely absorbed in place, it is easy to break if it is not in place, grab the solenoid valve body by hand, three or five minutes, see if there is a hot phenomenon, if there is no indication of the installation is normal.